When discussing the operational fluids within an agricultural machine, engine lubricating oil is often the first to come to mind. However, it is not the only one, as it can be accompanied by transmission oil, hydraulic circuit oil, coolant, and the operational fluid within the air conditioning system, not to mention diesel fuel and urea. A common characteristic of all these fluids is the progressive deterioration of their performance as solid or liquid contaminants infiltrate them. This issue is particularly critical in challenging environments such as engine crankcases or the hydraulic motors of agricultural equipment.
Years of experience have demonstrated that only effective control of contamination levels in these fluids can ensure their full functionality. This goal can only be achieved by periodically replacing the filter cartridges recommended by the machine manufacturers and ensuring that only components of proven quality are installed.
They withstand pressures up to 50 bar
A prime example of this is the “Csd” series screw-on filter cartridges manufactured by Fai Filtri. These cartridges are designed based on advanced engineering and utilize cutting-edge materials and technologies. They are available in a comprehensive range of models with various shapes and sizes, making them adaptable to any agricultural or industrial machine. Commonly referred to as “Spin-On Elements,” these filters are structurally designed to operate at medium pressures, with peaks up to 50 bar. They are ideally suited for applications such as hydraulic transmissions, supercharging of hydrostatic transmissions, earth-moving machines, compressors, converters, and hydraulic system feed or return lines. A shared feature of all models is their easy, quick, and clean replacement—an important factor when operating in degraded environmental conditions. Additionally, they feature new-generation filtering media that maintain performance even under very severe usage conditions.
Particularly noteworthy are the elements with absolute filtration of type “A” at 3, 6, 10, 16, and 25 microns. These are made using inert inorganic microfibers, impregnated and bonded with resins, and reinforced upstream and downstream with specific supports. This design makes the filter cores extremely compact, ensuring the stability of the filtering media and preventing the release of retained contaminants, even under high differential pressures and pressure surges caused by cold starts or demanding cyclic flows. Capable of handling flow rates of up to 140 liters per minute, Fai Filtri spin-on filter cartridges are also compatible with hydraulic oils, lubricating oils, fuels, water glycols, emulsions, and most synthetic fluids. In practical terms, they can protect virtually any fluid within the machine.
Title: Spin.On Elements Fai Filtri: invisible but strategic
Translation with ChatGPT
