Meeting Diverse Needs with Tailored Solutions developing a single seeding solution that can adapt to the vast variety of farm sizes and types is a challenging task. For this reason, manufacturers create machine series in which each model meets specific local needs. This approach is also followed by Horsch, whose “Versa” series provides a professional solution for large-scale operations and contractors. Notably, the “Versa 6 SW” stands out as a trailed seed drill paired with a “Kredo” rotary harrow. This model offers an impressive working width of six meters but can be compacted to just 2.96 meters for road transport without requiring escort vehicles.
Single or Double Hoppers
In a high-performing seed drill, a generous working width must be matched with ample in-field autonomy. To this end, the “Versa 6 SW” features hoppers available in two configurations: a single 4,000-liter tank or a dual-hopper setup with separate volumes of 2,000 and 3,000 liters, providing a combined capacity of 5,000 liters. The dual-hopper configuration allows simultaneous distribution of different seeds or a mix of seeds and granular fertilizers. However, the hopper configuration affects the axle load capacity, ranging from 8,600 kilograms for the single hopper to 10,000 kilograms for the dual version.
Balanced Weight Distribution
These loads are evenly distributed across eight rubber wheels with “19.0/45-17” tires, each approximately half a meter wide. This design minimizes soil compaction by distributing weight uniformly. The eight wheels also facilitate the operation of the “Kredo 6 HD” rotary harrow, positioned immediately behind. The harrow spans a six-meter working width with ten tine rotors for efficient soil preparation.
Precise and Thorough Finishing
Powered by the tractor’s PTO, the rotary harrow crushes soil clods into smaller particles, creating a finely tilled seedbed. To further refine the surface, optional finishing packers are available in ring or toothed roller designs. The ring packers come in 50 or 60 cm diameters, while the toothed rollers are 64 cm in diameter. These packers ensure the seeding elements operate on a perfectly leveled surface. The seeding units are available in configurations of 40 or 48 rows, allowing row spacing of 12.5 cm or 15 cm, adjustable based on the crop variety and desired planting density. Each unit offers a broad range of ground pressure, adjustable from 15 to 125 kilograms.
Up to 15 km/h Operating Speeds
Adjustments are determined by the refinement level of the seedbed, soil composition, and working speed, which can range from 5 to 15 km/h depending on the tractor’s power output. The combined setup requires between 280 and 400 horsepower. Seed placement is handled by the “TurboDisc” double-disc coulters, a proven design in use for over 20 years. These coulters ensure precise seed placement at the correct depth, even at high speeds, and adapt seamlessly to uneven terrain. Difficult soil moisture conditions can challenge operations, but the “TurboDisc” coulters are equipped with mobile plastic scrapers for effective self-cleaning, even in wet environments. To prevent clogging, the seed drop tubes are positioned ahead of the inner scrapers, while compacting wheels follow behind, pressing the soil back into place. These compacting wheels are available in widths of 5 or 7.5 cm to suit different soil and crop requirements.
Title: Horsch “Versa” seeders, each seed is positioned perfectly
Translation with ChatGPT
